|
|
|
|
|
|
AK20-7/8" OD 2" Cast Iron ID 7/8" Shaft Pulley Sheave Single 1 Groove V Style A Belt 4L New
|
|
|
AK20-7/8" OD 2" Cast Iron ID 7/8" Shaft Pulley Sheave Single 1 Groove V Style A Belt 4L New
AK2078
AK20 7/8" Bore Cast Iron Pulley - Keyway
for V-belt size 3L, 4L, A B
OD 2" ID 7/8"
|
- Outside diameter: 2" inch
- Length through bore: 1.1563" inch
- Bore: 7/8" inch
- Belt section size: 3L, 4L ,5L
- Material : Cast Iron
- One pulley
- 2 Hex set screw 90
- Keyway 3/16 X 3/32
|
|
|
|
|
|
|
|
|
|
|
|
7/8" Bore JA 7/8" QD Bushing "Quick Detachable" bushings are easy to install and remove
|
|
|
JA 7/8" inch Split-Taper Bushings ID: 0.75" H or QD Series
|
- JA 7/8" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Finished w/ Keyway
- Keyway size: 3/16 x 3/32 in
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
|
|
|
|
|
|
|
|
5/8" inch Bore Split-Taper Bushings ID: 0.625" H or QT Series
|
|
|
H 5/8" inch Split-Taper Bushings ID: 0.625" H or QT Series
|
- H 5/8" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Cast Iron
- Keyway size: 3/16 x 3/32 in
- Number of bolt : 2
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
|
|
|
|
|
|
|
|
3/4" Bore H style Split Taper Bushing mount sheaves ID : 0.75" (H3/4"-HX34- QH 3/4")
|
|
|
H 3/4" inch Split-Taper Bushings ID: 0.75" H or QT Series
|
- H 3/4" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Finished w/ Keyway
- Keyway size: 3/16 x 3/32 in
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
|
|
|
|
|
|
|
|
7/8" Bore H style Split Taper Bushing steel mount sheaves ID : 0.875" (H7/8"-HX78- QH 7/8")
|
|
|
H 7/8" inch Split-Taper Bushings ID: 0.75" H or QT Series
|
- H 7/8" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Finished w/ Keyway
- Keyway size: 3/16 x 3/32 in
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
|
|
|
|
|
|
|
|
1" Bore H style Split Taper Bushing steel mount sheaves ID :1" (H1"-HX1- QH 1")
|
|
|
H 1" inch Split-Taper Bushings ID: 1" H or QT Series
|
- H 1" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Keyway
- Keyway size: 1/4'' X 1/8''
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
|
|
|
|
|
|
|
|
1-1/8" Bore H style Split Taper Bushing steel mount sheaves ID :1.125" (H1.125"-HX118- QH 1.125")
|
|
|
H 1-1/8" inch Split-Taper Bushings ID: 1.125" H or QT Series
|
- H 1-1/8" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Keyway
- Keyway size: 1/4'' X 1/8''
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
|
|
|
|
|
|
|
|
1-3/16" Bore H style Split Taper Bushing steel mount sheaves ID :1.185" ( H1-3/16"-HX1316- QH 1.185" )
|
|
|
H 1-3/16" inch Split-Taper Bushings ID: 1.185" ( H or QT Series )
|
- H 1-3/16" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Keyway
- Keyway size: 5/16" X 3/16"
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
|
|
|
|
|
|
|
|
9/16" Bore H style Split Taper Bushing steel mount sheaves ID :0.566" (H0.56"-HX916- QH 0.56")
|
|
|
| 9/16" Bore H style Split Taper Bushing steel mount sheaves ID :0.563" (H-0.563"-HX916- QH 0.56")
|
- H 9/16" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Keyway
- Keyway size: 1/4'' X 1/8''
- Bolt Diameter :1/4"
- One Bushing
|
|
H or QT Split-Taper Bushings
These are for use with A-Section (4L and A) and B-Section (5L and B) V-belts as well as pulleys. The solid flange and double-split barrel improve concentricity and provide strong clamping on the shaft. As you tighten the included cap screws, the bushing grips the shaft and draws into the pulley. The bushings have a 3° taper and are made of steel.
|
|
|
|
|
|
|
|
|
|
1-3/8" Bore H style Split Taper Bushing steel mount sheaves ID :1.375" ( H1-3/8"-HX138- QH 1.375" )
|
|
|
H 1-3/8" inch Split-Taper Bushings ID: 1.375" ( H or QT Series )
|
- H 1-3/8" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Keyway
- Keyway size: 5/16" X 3/16"
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
|
|
PowerTwist Plus V-Belt
