|
|
|
|
 |
BK20 1/2" Inch Bore Solid Pulley with 2" OD for V-belts cast iron size 4L, 5L
|
|

1 Groove BK20 1/2" Bore Solid Pulley 2" Outer Diameter
|
- Outside diameter: 2" inch
- Bore: 1/2" inch
- Belt section size: 4L, 5L
- 1 Groove
- One pulley
- Hex set screws
|
|
|
|
 |
|
|
|
|
 |
BK20 3/4" Inch Bore Solid Pulley with 2" OD for V-belts cast iron size 4L, 5L
|
|

1 Groove BK20 3/4" Bore Solid Pulley 2" Outer Diameter
|
- Outside diameter: 2" inch
- Bore: 3/4" inch
- Belt section size: 4L, 5L
- 1 Groove
- One pulley
- keyway
- 2 Hex set screws
|
|
|
|
 |
|
|
|
|
 |
AK20-7/8" OD 2" Cast Iron ID 7/8" Shaft Pulley Sheave Single 1 Groove V Style A Belt 4L New
|
|

AK20-7/8" OD 2" Cast Iron ID 7/8" Shaft Pulley Sheave Single 1 Groove V Style A Belt 4L New AK2078
AK20 7/8" Bore Cast Iron Pulley - Keyway for V-belt size 3L, 4L, A B OD 2" ID 7/8"
|
- Outside diameter: 2" inch
- Length through bore: 1.1563" inch
- Bore: 7/8" inch
- Belt section size: 3L, 4L ,5L
- Material : Cast Iron
- One pulley
- 2 Hex set screw 90
- Keyway 3/16 X 3/32
|
|
|
|
 |
|
|
|
|
 |
BK20 5/8" Inch Bore Solid Pulley with 2" OD for V-belts cast iron size 4L, 5L
|
|

1 Groove BK20 5/8" Bore Solid Pulley 2" Outer Diameter
|
- Outside diameter: 2" inch
- Bore: 5/8" inch
- Belt section size: 4L, 5L
- 1 Groove
- One pulley
- Hex set screws
|
|
|
|
 |
|
|
|
|
 |
7/8" Bore JA 7/8" QD Bushing "Quick Detachable" bushings are easy to install and remove
|
|

JA 7/8" inch Split-Taper Bushings ID: 0.75" H or QD Series
|
- JA 7/8" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Finished w/ Keyway
- Keyway size: 3/16 x 3/32 in
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
 |
|
|
|
|
 |
5/8" inch Bore Split-Taper Bushings ID: 0.625" H or QT Series
|
|

H 5/8" inch Split-Taper Bushings ID: 0.625" H or QT Series
|
- H 5/8" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Cast Iron
- Keyway size: 3/16 x 3/32 in
- Number of bolt : 2
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
 |
|
|
|
|
 |
3/4" Bore H style Split Taper Bushing mount sheaves ID : 0.75" (H3/4"-HX34- QH 3/4")
|
|

H 3/4" inch Split-Taper Bushings ID: 0.75" H or QT Series
|
- H 3/4" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Finished w/ Keyway
- Keyway size: 3/16 x 3/32 in
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
 |
|
|
|
|
 |
7/8" Bore H style Split Taper Bushing steel mount sheaves ID : 0.875" (H7/8"-HX78- QH 7/8")
|
|

H 7/8" inch Split-Taper Bushings ID: 0.75" H or QT Series
|
- H 7/8" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Finished w/ Keyway
- Keyway size: 3/16 x 3/32 in
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
 |
|
|
|
|
 |
1" Bore H style Split Taper Bushing steel mount sheaves ID :1" (H1"-HX1- QH 1")
|
|

H 1" inch Split-Taper Bushings ID: 1" H or QT Series
|
- H 1" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Keyway
- Keyway size: 1/4'' X 1/8''
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
 |
|
|
|
|
 |
1-1/8" Bore H style Split Taper Bushing steel mount sheaves ID :1.125" (H1.125"-HX118- QH 1.125")
|
|

H 1-1/8" inch Split-Taper Bushings ID: 1.125" H or QT Series
|
- H 1-1/8" Bore Bushing
- Flange outside diameter: 2-1/2"
- Flange thickness: 1/4" inch
- Length through bore: 1-1/4"
- Material : Steel
- Bore type: Keyway
- Keyway size: 1/4'' X 1/8''
- Bolt Diameter :1/4"
- One Bushing
|
|
Split taper bushings mount sheaves and sprockets on shafts and are built to withstand torque generated in power transmission
The double split steel, flanged design makes these bushings more adjustable in regards to shaft size and improves hold strength. The bushing also includes a keyway to help lock it in place on the shaft.
|
|
 |